OK Autrod 308LSi
A continuous solid corrosion resisting chroumium-nickel wire for welding of austenitic chromium nickel alloys of 18% Cr - 8% Ni-type. OK Autrod 308LSi has a good general corrosion resistance. The alloy has a low carbon content which makes this alloy particularly recommended where there is a risk of intergranular corrosion. The higher silicon content improves the welding properties, such as wetting. The alloy is widely used in the chemical and food processing industries as well as for pipes, tubes and boilers.
Typical Charpy V-Notch Properties
| as welded | ||||
Typical Tensile Properties
| Condition | As Welded | As Welded |
| Shielding Gas | Tested at 350°C. | |
| Tensile Strength | 570 MPa (83 ksi) | 490 MPa (71 ksi) |
| Yield Strength | 420 MPa (61 ksi) | 370 MPa (54 ksi) |
| Elongation | 36 % | |
Recommended Welding Parameters
| Wire Diameter | ||||
| 0.6 mm (0.025 in.) | ||||
| 1.14 mm (0.045 in.) | ||||
Deposition Data
| Current | Deposition Rate | Diameter | Voltage | Wire Feed Speed |
| 80-240 A | 1.5-6.0 kg/h (3.3-13. lb/h) | 1.0 mm (0.040 in.) | 15-28 V | 4.0-16.0 m/min (157-630 in./min) |
| 100-300 A | 1.6-7.5 kg/h (3.5-16. lb/h) | 1.2 mm (0.047 in.) | 15-29 V | 3.0-14.0 m/min (118-551 in./min) |
| 65-220 A | 1.1-5.4 kg/h (2.4-11. lb/h) | 0.9 mm (0.035 in.) | 15-28 V | 3.5-18.0 m/min (138-709 in./min) |
| 55-160 A | 1.0-4.1 kg/h (2.2-9.0 lb/h) | 0.8 mm (0.030 in.) | 15-24 V | 4.0-17.0 m/min (157-669 in./min) |
| 230-375 A | 5.2-8.6 kg/h (11.5-19. lb/h) | 1.6 mm (1/16 in.) | 23-29 V | 5.5-9.0 m/min (217-354 in./min) |
Classifications
| Wire Electrode |
SFA/AWS A5.9 : ER308LSi Werkstoffnummer : ~1.4316 EN ISO 14343-A : G 19 9 L Si |
Approvals
| Approvals |
BV 308L SA BT (M12) CE EN 13479 CWB ER308LSi DB 43.039.01 DNV-GL VL 308 L (M13) NAKS/HAKC 0.8-1.2 mm VdTÜV 04267 |
| Approvals are based on factory location. Please contact ESAB for more information. |
Consumable Characteristics
| Alloy Type | Austenitic (with approx. 8 % ferrite) 19% Cr - 9% Ni - Low C - High Si |
| Shielding Gas | M12, M13 (EN ISO 14175) |
Typical Weld Metal Analysis %
| Typical Weld Metal Analysis % | ||||||||||||||
| C | Cr | Cu | FN WRC-92 | Mn | Mo | N | Nb | Ni | P | S | Si | |||
| 0.03 % | 19.5 % | 0.1 % | 6 % | 1.8 % | 0.03 % | 0.04 % | 0.01 % | 10.0 % | 0.020 % | 0.009 % | 0.7 % | |||
| Typical Wire Composition % | ||||||||||||||
| 0.01 % | 20.0 % | 0.10 % | 8 % | 1.8 % | 0.1 % | 0.06 % | 0.02 % | 10.0 % | 0.013 % | 0.012 % | 0.8 % | |||
How to purchase OK Autrod 308LSi
We are as eager to put ESAB product in your hands as you are to have them. That is why we sell our products through distributors who will give you the attention, support, and value you deserve. Their expertise will make sure you are happy with the purchasing process.To find an ESAB distributor, just use the distributor locator tool featured on every page of our site. Alternatively, you can call our support line at +65 6318 2608. You can also email us at machines@esabasia.com or consumables@esabasia.com and we will point you in the right direction.