Stoody Vancar E is a coated fabricated electrode that contains specially formulated vanadium tungsten carbide particles approximately equal to tungsten carbide in hardness but at only half the density. Vancar has an advantage over tungsten carbide because it can be applied in multiple layers and still retain its original hardness due to uniform distribution of the carbide particles.
- This provides wear rates that remain uniform throughout the life of the deposit.
|130-165 A||Full Range||4.8 mm (3/16 in.)|
|80-130 A||Full Range||4.0 mm (5/32 in.)|
Typical Weld Metal Analysis %
|Typical Weld Metal Analysis %|
|4.9 %||Bal %||0.8 %||0.8 %||0.5 %||2.1 %||18.0 %||10.0 %|
How to purchase Stoody Vancar-EWe are as eager to put ESAB product in your hands as you are to have them. That is why we sell our products through distributors who will give you the attention, support, and value you deserve. Their expertise will make sure you are happy with the purchasing process.
To find an ESAB distributor, just use the distributor locator tool featured on every page of our site. Alternatively, you can call our support line at +65 6318 2608. You can also email us at firstname.lastname@example.org or email@example.com and we will point you in the right direction.