Exaton 27.7.5.L


Exaton 27.7.5.L

The following items have been added to your list


Exaton 27.7.5.L is a hyper-duplex (austenitic-ferritic) filler metal with improved yield strength and better pitting and crevice corrosion resistance compared to super-duplex stainless steels (UNS S32750 and S32760). It also has higher HISC (hydrogen induced stress cracking) resistance compared to super-duplex stainless steels and higher resistance to aggressively sour environments. Exaton 27.7.5.L can be advantageously used for welding 13% Cr flow pipes, as its high strength enables reduction of repair rates during pipeline production, because finite element analysis is not required for weld metal of matching strength and the acceptance criteria can be less onservative. The high pitting resistance of Exaton 27.7.5.L makes it suitable for root pass welding in Sandvik SAF 2507 and other super-duplex stainless steels (UNS S32750 and S32760) when the risk of pitting corrosion is critical, or when mixed shielding gases cannot be used. Exaton 27.7.5.L can be used for plasma welding, but primarily used for overlay welding using hot wire TIG and mechanical TIG e.g. tube sheets in heat-exchangers or for joint welding of hyper-duplex (UNS S32707) pipe with wall thickness < 13 mm.

Typical Charpy V-Notch Properties

as welded

Typical Tensile Properties

ConditionElongationTensile Strength Yield Strength
As Welded25 %890 MPa (129 ksi)690 MPa (100 ksi)

Recommended Welding Parameters

Current Voltage Wire Diameter Wire Feed Speed
40-120 A 15-19 V 0.8 mm (0.030 in.) 4.0-8.0 m/min (157-315 in./min)
150-260 A 24-29 V 1.2 mm (0.047 in.) 3.0-10.0 m/min (118-394 in./min)


Grade G Z 27 7 5 L
Name EN ISO 14343-A

Consumable Characteristics

Alloy Type Austenitic-ferritic (duplex) with approx. 65% ferrite - 27% Cr - 6.5 %Ni - 5% Mo - Low C
Shielding Gas N2 (EN ISO 14175)

Typical Weld Metal Analysis %

Typical Wire Composition %
C Co Cr Cu Mn Mo N Nb Ni P PRE S Si Ti V W
0.015 % 1 % 27 % 0.15 % 1.0 % 5.0 % 0.4 % 0.01 % 6.5 % 0.017 % 49 % 0.0007 % 0.3 % 0.001 % 0.07 % 0.02 %

How to purchase Exaton 27.7.5.L

We are as eager to put ESAB product in your hands as you are to have them. That is why we sell our products through distributors who will give you the attention, support, and value you deserve. Their expertise will make sure you are happy with the purchasing process.

To find an ESAB distributor, just use the distributor locator tool featured on every page of our site. Alternatively, you can call our support line at +65 6318 2608. You can also email us at machines@esabasia.com or consumables@esabasia.com and we will point you in the right direction.